How to remove “I Dont hate Mozilla but use IE or Else” virus



When you get the Message:"I Dont hate Mozilla but use IE or Else”

Go to the Task Manager (Press CTRL+ALT+DEL and go to the processes tab)

Click on the "Application Tab."

  1. Right click on the application that is giving the message and select "go to process.
  2. "Svchost.exe" should be highlighted. and its user name is your computer name(eg:anuraj)Make sure you dont stop “svshost.exe” which is running under windows username (SYSTEM,NETWORK, SERVICE)
  3. Right Click and Select "End Process Tree"
  4. Delete all “svshost.exe” files except the one which is under C:\WINDOWS\system32″
  5. Restart windows

How we remove "ORKUT IS BANNED” muhaha virus?


When you get the Message:"
ORKUT IS BANNED”
1. Go to the Task Manager(
Press CTRL+ALT+DEL and go to the processes tab)
2. Click on the "Application Tab."
3. Right click on the application that is giving the message and select "go to process."
4 "Svchost.exe" should be highlighted. and its user name is your computer name(eg:anuraj)Make sure you dont stop “svshost.exe” which is running under windows username (SYSTEM,NETWORK, SERVICE)
5. Right Click and Select "End Process Tree"

If you really wanna get rid of the Malware there is a File called "heap41a" which is located in "C:\heap41a."
Their is the script in the file"
in this Two websites which are been blocked... (Orkut and youtube)
you can also edit this script by blocking different websites
Delete "C:\heap41a"


HOW TO FORMAT NOKIA MOBILES


NOKIA MOBILES CAN FORMAT USING THIS CODE *#7370#

  1. Press following key sequence *#7370#
  2. Enter Default lock code is 12345.
  3. After entering this code phone will restart
  4. after restarting it will show select country option


Please not Data will be deleted during formatting so we recommend please take a copy of your mobile contacts ,messages and your valuable data s

Another method

  1. Switch off your Nokia phone.
  2. Hold down the following three keys Call button key,star key(*),three key(3) and On key to start phone
  3. While holding these buttons, press the power button and switch on the phone.
  4. Wait for message ‘Formatting’ to appear on the screen and release all keys once you see that message(Nokia n series does not show formating message it will show select country option after finishing the formating )

HOW TO RESET NOKIA MOBILES

TO RESET NOKIA MOBILES BY USING THIS CODE *#7780#
  1. Press following key sequence *#7780#
  2. Enter Default lock code is 12345.
  3. After entering this code phone will restart

HOW TO CHECK SIM-LOCK IN NOKIA MOBILES

CHECK SIM-LOCK
Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.
This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.
There are 4 different locks on your Nokia phone.
  • COUNTRY-LOCK
  • NETWORK-LOCK
  • PROVIDER-LOCK
  • SIMCARD-LOCK
The code to read out the sim-lock status of your phone is #PW+(MASTERCODE)+(Y)#
  • # = DOUBLE-CROSS
  • W = PRESS "*" THREE TIMES
  • P = PRESS "*" FOUR TIMES
  • + = PRESS "*" TWO TIMES
  • MASTERCODE = 1234567890
  • Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!
"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.
SIM-LOCK CHECKS
  • #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
  • #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
  • #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
  • #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

How to re-program some chips inside of your Nokia phone.

NETWORK MONITOR
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
  1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

  2. Take apart the phone.

  3. De-solder the EEPROM (ATMEL AT 24C64).

  4. Read out the data with an EEPROM programmer and save it to a file (Backup).

  5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".

  6. If you have v5.24 then change the address "0378" from "00" to "FF".

  7. Write the new data to the EEPROM and solder it back to the phone,

  8. Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information.
  • Carrier number
  • MS RX Level in DBM
  • Received signal quality
  • MS TX power level
  • C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
  • RTL (Radio link timeout).
  • Timeslot
  • Indication of the transmitter status
  • Information on the Network parameters.
  • TMSI (Temporary Mobile Subscriber Identity).
  • Cell identification (Cell ID, Number of cells being used).
  • MCC (Mobile country code)
  • MCN (Mobile network code)
  • LAC (Location area code)
  • Ciphering (On/Off)
  • Hopping (On/Off)
  • DTX (On/Off)
  • Discard cell barred information

HOW TO USE NOKIA PHONE AS SPY

THE JAMES BOND TRICK(HOW TO USE NOKIA PHONE AS SPY)
If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

HOW TO ACTIVATE EFR CALL QUALITY

HOW TO ACTIVATE EFR CALL QUALITY
To activate EFR (Enhanced Full Rate) Enter the code-*3370#
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the code-#3370#

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.
1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.
2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

Clock stopping code for nokia

Clock Stopping
To check weather your SIM Card supports clock stopping type-*#746025625# (*#SIM0CLOCK#)

HOW TO GET NOKIA MOBILE USED HOURS(LIFE TIMER)


To enter the service menu type-*#92702689# (*#WAR0ANTY#)
    • Serial number (IMEI)
    • Production date (MM/YY)
    • Purchase date (MM/YY) You can only enter the date once.
    • Date of last repair (0000=No repair)
    • Transfer user data to another Nokia phone via Infra-Red
    • Life timer

    How to check the phones Software Version

    To check the phones Software revision type-*#0000#
    Information you get from the Software revision-
    V 05.31
    18-02-99
    NSE-3
    • 1ST Line = Software revision
    • 2ND Line = The date of the software release
    • 3RD Line = Phone type

    HOW TO CHECK IMEI NUMBER

    To check the IMEI (International Mobile Equipment Identity) Type-*#06#
    Information you get from the IMEI-
    XXXXXX XX XXXXXX X
    TAC FAC SNR SP
    • TAC = Type approval cod
    • eFAC = Final assembly code
    • SNR = Serial number
    • SP = Spare

    Atlantis' Mission in Photos!